A single ceiling fixture in the middle of a room rarely does the job, leaving corners dim and countertops in shadow. Recessed lights spread clean, even light across the whole space while tucking neatly into the ceiling. Norton Electric LLC brings recessed lighting installation to living spaces and workplaces in Georgetown, IN, New Albany, Sellersburg, Clarksville, and Corydon.
Georgetown, Indiana, is home to Norton Electric LLC, an owner-operated electrical contractor run by Indiana Master Electrician Sean Norton, who has more than 22 years of experience in the trade. We specialize in Recessed Lighting Installation for kitchens, living rooms, basements, offices, and commercial spaces across the Southern Indiana counties we serve, including Floyd, Clark, Harrison, and Scott. Each project includes a custom layout plan, IC-rated LED fixtures, circuit and dimmer planning, and our 1-year craftsmanship warranty.
Plenty of homes around Southern Indiana still rely on one overhead light per room, plus a few lamps to fill the gaps. That setup leaves you with a kitchen where you cast a shadow over whatever you're chopping, a living room that feels gloomy by 5 p.m. in December, and a basement that looks like a cave no matter how many bulbs you swap. Some homeowners try adding recessed lights themselves, only to end up with uneven spacing, flickering dimmers, or fixtures that run hot.
Poor layout causes most lighting complaints, since lights placed too far apart create dark patches while lights crowded together waste energy and add glare. Older recessed cans bring their own problems, because non-IC-rated housings can overheat when they touch attic insulation, and leaky housings let conditioned air escape into the attic. On top of that, many standard dimmers weren't designed for LED loads, which leads to buzzing, flicker, and a limited dimming range.
We start by walking through the space with you and mapping a layout based on ceiling height, room use, and where you need task lighting most, typically spacing fixtures about half the ceiling height apart as a starting point. After checking joist locations and confirming the circuit can handle the new load, we fish cable through the ceiling, cut clean openings, and install IC-rated, airtight LED fixtures or slim canless wafer lights. We finish by pairing the lights with an LED-compatible dimmer, testing every fixture, and making sure the glow looks even from corner to corner.
Your room ends up bright where you need it, soft where you want it, and free of those dark corners. Better yet, the fixtures sit flush with the ceiling, so the space looks cleaner and more open than before.
Recessed lights deliver a sleek look and practical light in nearly any room.
A well-planned grid of fixtures washes the room in consistent light. Kitchens, offices, and craft rooms become much easier to work in.
With fixtures sitting flush overhead, nothing hangs down to bump into or clutter the view. Low basement ceilings especially benefit from that streamlined look.
Modern LED recessed lights use a fraction of the power of old incandescent cans. They also last for years, so you'll rarely need to climb a ladder.
Pairing your lights with the right dimmer lets you go from bright task lighting to a relaxed evening glow. Movie nights and dinner parties both get the atmosphere they deserve.
IC-rated, airtight housings can safely touch insulation and help keep heated or cooled air from leaking into the attic. That matters in Indiana homes that battle both humid summers and frigid winters.
Recessed fixtures often anchor a larger lighting plan, and these related services fill in the rest.
Carry that polished look outside with our Outdoor & Landscape Lighting Installation service, which adds path lights, uplighting, and security fixtures around your home or storefront.
Ready to retire old bulbs and fixtures throughout the house? Our LED Lighting Installation service upgrades lighting room by room for lower energy bills and better color.
From pendants and chandeliers to commercial lighting, our full Lighting Installation team turns your design ideas into finished spaces across Southern Indiana.
Every recessed lighting project starts with listening, because we want the finished room to match what you pictured.
Sean enjoys sitting down with customers to sketch out detailed lighting plans before we cut a single hole. You'll see where each fixture goes and why it belongs there.
Plaster ceilings, tight joist bays, and decades-old wiring don't slow us down. We've worked in homes of every age across Clark and Floyd counties and know how to route new cable with as little disruption as possible.
Lighting projects earn some of our best reviews, and customers often mention how easy we made the process. That kind of feedback keeps us motivated on every job.
Each light, dimmer, and connection we install falls under our 1-year craftsmanship warranty. If anything we put in doesn't perform as it should, give us a call.
Free consultations and estimates let you explore ideas without any pressure. Financing, all forms of payment, and military and senior discounts help turn the plan into reality.
Yes, though plaster takes more care than drywall since it can crack under a careless cut. Electricians use sharp hole saws, support the surrounding ceiling, and often choose slim canless fixtures that need less clearance. Older homes may also need a new circuit to handle the added lights.
Not always, since LED recessed lights draw very little power, often 10 to 15 watts each. An existing lighting circuit can usually handle several fixtures, but your electrician should confirm the load and check the condition of the wiring first. Basements and additions sometimes get a new circuit to keep things organized and leave room for future needs.
A common starting point is spacing lights about half the ceiling height apart, so an 8-foot ceiling works well with fixtures roughly 4 feet apart. Kitchens also benefit from lights placed over the front edge of the countertops, which cuts down on shadows while you work. Your electrician can fine-tune the layout around cabinets, islands, and joists.
Traditional recessed lights use a metal housing, or can, mounted above the ceiling with a separate trim and bulb. Canless fixtures combine the light and trim into one slim unit with a small junction box, which makes them ideal for remodels and tight ceilings. Both work well, and the right choice depends on your ceiling space and the look you want.
Most homeowners prefer 2700K to 3000K for living areas and bedrooms, since it creates a warm, inviting feel. Kitchens, garages, and workspaces often look better at 3500K to 4000K for crisper light. Many newer fixtures let you switch color temperatures with a small selector, which makes choosing easier.
FAQs Reviewed By Sean Norton, Owner of Norton Electric and a Trusted Local Electrician Licensed and Certified to Serve Georgetown, IN, and Beyond.
Your home deserves lighting that looks as good as it works. Norton Electric designs and installs recessed lighting for Georgetown-area homes, and we stand behind every fixture for a full year. Book your free lighting consultation today.
Address: 7802 John Pectol Rd, Georgetown, IN 47122
Phone: (502) 644-9896
Business Hours:
Mon - Fri: 8:00 AM to 05:00 PM
Sat-Sun: Closed